Notícias

O processo de produção de folha de PVC de plástico rígido sólido

Oct 21, 2021 Deixe um recado

Folha de PVC de plástico rígido sólidogeralmente é feito sobrepondo e aquecendo a folha de PVC laminada. A folha de PVC de plástico rígido sólido é dividida em 3 estágios de aquecimento, 1 estágio de ajuste e 1 estágio de resfriamento.

1. Estágio de aquecimento de baixa temperatura

2. Estágio de aquecimento de temperatura média

3. Estágio de aquecimento de alta temperatura

4. Pare o estágio de ajuste de aquecimento

5. Estágio de resfriamento

PVC rigid board is usually made by superposing and heating the rolled PVC sheet. According to needs, this solid rigid plastic PVC sheet can be flexibly made into various thicknesses. As PVC is a thermally unstable resin, it will decompose to release HCl and form a polyene structure. If processed at high temperature for a long time, it will seriously affect the performance of the product. However, PVC is also a poor heat conductor and slow heat transfer. To prepare products with good performance, the heating time is difficult to control. If the heating time is not enough, the inside of the board is easy to layer; if the heating time is too long, it will not only reduce the production efficiency, What's more serious is that PVC will decompose rapidly at high temperature for a long time, which will affect the performance of the product.

2

Enviar inquérito